Vehicle: Lamborghini Gallardo LP series | 2009 - 2014 | Coupe | Spyder | 2WD | 4WD
Base: 550-570 hp / 400 ft/lbs
Engine: 5.2 V10 FSI
ECU: 2x MED9
Supercharged: 760 hp / 600 ft/lbs
6.5 PSI Eaton TVS2300 Roots supercharger
6061 Aluminum manifold
Integrated air/water aftercooler
ECU software calibration flash
VF760 Gallardo LP
Eaton TVS2300 roots supercharger
6061 Aluminum intake manifold
Internal bypass system
High flow dual throttle body inlet
Air water charge cooler system
Polypropylene water reservoir
OEM high density water radiator
Bosch water pump
High capacity Hitachi fuel injectors
Hard anodized 6061-T6 aluminum bracket
OEM 7 rib serpentine belt and tensioner FEAD
High flow MAF housings
2x K&N induction filters with pre-filters
Hex Flash ECU tuning programming cable
Fully reversible
Made in California, USA.
The Flaghship product to emanate from the VF-Engineering R&D facility in Anaheim, California in 2011 is a bolt on roots supercharger system adding 200hp and 200lbs of torque to the V10 Gallardo (FSI engine). Available for 2009-14 models worldwide, this system uses the latest generation Eaton TVS2300 4-lobe roots supercharger with an air/water aftercooling system.
Using state of the art technology and production processes, VF-Engineering have created a system that integrates with the V10 engine effectively and produces a proven result which has been adopted and installed in the primary and aftermarket.
Packing a lag-free instant punch of torque from 5psi of boost at 1500rpm, the air charge progressively climbs to 6.5psi at redline resulting in exhilarating increase in acceleration. The supercharger creates a predictable delivery of power output likening the car to that of the V12 Lamborghini. This suits all driving styles and conditions and not just straight line acceleration.
Designed as a reversible and simple upgrade this product is targeted at the daily driver and enthusiast looking to retain the character of the V10 Lamborghini.
Engine calibration is programmed with an ECU OBD2 port electronic flash/Direct flash and was designed by VF/Hex Tuning maintaining the Bosch safety functions and using the factory engine controls to re-calibrate for an enhanced combustion cycle. Extensive tuning of the camshaft timing mapping, allows appropriate charging of the combustion cylinders to produce an extra 120 ft/lbs of torque at 2000rpm.
Tested by Motor Trend magazine, the supercharged V10 achieves 0-60 in 3.1s (originally 3.9s) and hits the quarter mile flag in just 11.0 sec @ 127.3 mph.
BEFORE
AFTER
Disclaimer
This product is not compliant with the California Air Resource Board and not for use on public roads in California.
This applies to any aftermarket product that does not display a CARB EO#. Power ratings are subject to conditions and dynomometer model used.